Door & Gate Springs
1" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO1000150 >
1" X 1-3/4" M/D OVAL DIE SPRINGS-LANSMDO1000175 >
1" X 2" M/D OVAL DIE SPRINGS-LANSMDO1000200 >
1" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO1000250 >
1" X 3" M/D OVAL DIE SPRINGS-LANSMDO1000300 >
1-1/4" X 2-1/2" M/D OVAL SPRINGS-LANSMDO1250250 >
1-1/4" X 3-1/2" OVAL DIE SPRINGS-LANSMDO1250350 >
1-1/4" X 4" M/D OVAL DIE SPRINGS-LANSMDO1250400 >
3/8" X 1" MED/DUTY OVAL DIE SPRING-LANSMDO375100 >
3/8" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO375150 >
3/8" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO375250 >
3/8" X 3" M/D OVAL DIE SPRINGS-LANSMDO375300 >
1/2" X 1" M/D OVAL DIE SPRINGS-LANSMDO500100 >
1/2" X 12" M/D OVAL DIE SPRINGS-LANSMDO5001200 >
1/2" X 1-1/4" M/D OVAL DIE SPRINGS-LANSMDO500125 >
1/2" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO500150 >
1/2" X 1-3/4" M/D OVAL DIE SPRINGS-LANSMDO500175 >
1/2" X 2" M/D OVAL DIE SPRINGS-LANSMDO500200 >
1/2" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO500250 >
1/2" X 3" M/D OVAL DIE SPRINGS-LANSMDO500300 >
1/2" X 3-1/2" M/D OVAL DIE SPRINGS-LANSMDO500350 >
5/8" X 1" M/D OVAL DIE SPRINGS-LANSMDO625100 >
5/8" X 1-1/4" M/D OVAL DIE SPRINGS-LANSMDO625125 >
5/8" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO625150 >
Recently Viewed
9" X 11" ULTRA FINE SANDPAPER--PACK OF 5-JWH357232 >
Square D™ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QO™/Homeline™ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
44918 RIDGID 600-I Hand-Held Power Drive Pipe Threader with (4) 1/2" to 1-1/4" NPT 11R Die Heads, Carry Case, and Support Arm
The RIDGID Model 600-I Power Drive is a double insulated drive that provides power for threading pipe and conduit. Forward and Reverse rotation can be selected with a slide switch, while ON/OFF is controlled by a two-step momentary contact switch. The 600-I Power Drive is designed to use RIDGID 11-R Drop Head Die Heads (1/8" to 1-1/4" Pipe Capacity).
Product Features
Lightweight and easy to handle for service and repair.
Over molded handle and contoured grip provide optimal control.
Screw-in brush covers reduce service time.
Durable die cast gear housing and fiberglass reinforced plastic body to withstand demanding jobsite conditions.
Dual "V" Jaw Support Arm firmly prevents slipping.
#50-2 ROLLER CHAIN OFFSET LINKS-REN502OL>
DOUBLE BLOCKS-BLK035482>
Appleton® ETP™ 8466A Raised Square Box Cover, 4 in L x 4 in W x 1 in D, Steel
Appleton® ETP™ 8466A Raised Square Box Cover, 4 in L x 4 in W x 1 in D, Steel
