Cable to Channel Clamps
The Crosby G-450 7/8" is a heavy-duty, drop-forged wire rope clip (part number 1010211) designed by The Crosby Group to clamp and secure 7/8-inch diameter wire ropes. It features a hot-dip galvanized coating to prevent rusting and is instantly recognizable on jobsites by its signature Red U-Bolt.
Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.
Recently Viewed
DIXON GL-135 Dry Standard Pressure Gauge, 0 to 200 psi, 1/4 in Connection, 2 in Dial
Midland Industries 80-006 Dry Standard Pressure Gauge, 0 to 200 psi, 1/4 in Connection, 2 in Dial
4-1/2" X 1/4" X 7/8" METAL TYPE 27 GRINDING WHEEL, DEPRESSED CENTER. ALUMINUM OXIDE-FOR71886 >
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
Klein Tools Full Brim Hard Hat Earmuffs are designed to work with all Klein Tools Full Brim Hard Hats, and are intended to provide limited protection from harmful noise. Tested in accordance with ANSI S3.19-1974 standards, the NRR (noise reduction rating) for these earmuffs is 26dB. Designed for all day comfort and effective acoustic seal.
12-MB-12-MB HYDRAULIC ADAPTERS-DAY64071212>
Milwaukee® 2268-20 Infrared Thermometer, -22 to 1472 deg F, +/-1.8 % Accuracy, 12:1 Focus Spot, 0.96 Fixed, 9V Battery
The Milwaukee infrared temp-gun delivers the clearest screen and faster scanning. With stunning readability indoor & outdoor, this infrared temp-gun provides easier readings for professional, residential, commercial and industrial users in any environment. Simple high/low alert setup makes scanning easier and faster. With a 7-point reinforced frame, fully bumpered nose, and shielded LCD, the Milwaukee infrared temp-gun survives 6 ft drops for superior durability.
