Beam Clamp Anchor Clips
G-2130-3/4 CROSBY MATERIAL HANDLING GROUP 3/4" 5-TON ANCHOR SHACKLE P
The Crosby G-2130 3/4" is a heavy-duty, bolt-type carbon steel anchor shackle (part number 1019515) featuring a 4.75-ton (10,450 lbs) Working Load Limit (WLL) and a 6:1 design safety factor. It incorporates a hot-dip galvanized finish for long-term corrosion resistance and uses a secure alloy steel bolt, nut, and cotter pin configuration to prevent pin rotation or loosening under vibrating or dynamic loads.
G-2130-5/8 CROSBY 5/8" 3-1/4-TON SHACKLES
The Crosby G-2130 5/8" is a premium, hot-dip galvanized carbon steel bolt-type anchor shackle designed for high-security, long-term, or permanent rigging installations. It features a safety-focused mechanism consisting of an alloy steel load pin, a hex nut, and a secure cotter pin to prevent the pin from backing out under rotating or sliding loads.
G-2130-7/8 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
Heavy-duty, bolt-type carbon steel anchor shackle featuring a Working Load Limit (WLL) of 6.5 tons (14,300 lbs). It is built for permanent or long-term rigging and towing applications because its bolt, nut, and cotter pin design prevents the pin from loosening under high vibration or load movement.
S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
S-2150-1-3/4 CROSBY 1-3/4" BOLT CHAIN SHACKLES
Working Load Limit (WLL): 25 Metric Tons (55,000 lbs). Design/Safety Factor: 6:1 structural safety margin. Material: Forged carbon steel body with a quenched and tempered alloy pin. Finish: Self-Colored (un-galvanized/painted or natural steel finish indicated by the "S" prefix). Pin Style: Thin hex-head bolt with a nut and cotter pin securement. Approximate Weight: 31.4 lbs (14.2 kg
Recently Viewed
.500" X 1.124X.250" RADIAL SHAFT SEAL WITH METAL CASE, SKF WAVE LIP AND AUXILIARY, CONTACTING LIP OIL SEAL.
Morse® AV58 Master Cobalt® Heavy Duty Hole Saw, 3-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Quantum® QSB110YL Economy Shelf Bin, 17-7/8 in L x 11-1/8 in W x 4 in H, 3.8 cu-ft, Yellow
Gates® Power Transmission Hi-Power® II C169 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 173 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Powerâ„¢ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
HCI Preferred Supplier 18225 90 deg Tube-to-Pipe Elbow, 1/4 in Nominal, Compression x MNPTF End Style, CA377 Brass
HCI Preferred Supplier 18225 90 deg Tube-to-Pipe Elbow, 1/4 in Nominal, Compression x MNPTF End Style, CA377 Brass
MORSE® 58209 5942 Ball Nose Center Cutting Regular Length Single End End Mill, 9/64 in Dia Cutter, 9/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, Bright
