PLUGS
2"-8 HSS PLUG TAP - PDTER6020008>
1-3/4" -5 HIGH SPEED STEEL TAP-PDTER6014805 >
1-5/16" -12" SPECIAL PITCH PLUG TAP-PDTER6012012 >
5/16"-32 SPECIAL PITCH PLUG TAP - PDTER6002032>
8-40" PLUG TAP-PDTER6000840 >
6-48" PLUG TAP - PDTER6000648>
27-MM X 1.50 FOUR FLUTE HAND PLUG TAP-PDTEP5040270 >
20-MM X 2.00 SPEC/PITCH PLUG TAP-PDTEP5040200 >
18-MM X 1.00 SPEC/PITCH PLUG TAP-PDTEP5040181 >
16-MM X 1.00 SPEC/PITCH PLUG TAP-PDTEP5040161 >
14-MM X 1.00 SPEC/PITCH PLUG TAP-PDTEP5040140 >
12-MM X 1.00 SPEC/PITCH PLUG TAP-PDTEP5040121 >
12-MM X 1.50 PLUG TAP-PDTEP5040120 >
11-MM X 1.00 SPEC/PITCH PLUG TAP-PDTEP5040111 >
11-MM X 1.50 METRIC PLUG TAP-PDTEP5040110 >
9-MM X 1.25 SPEC/PITCH PLUG TAP-PDTEP5040090 >
6-MM X 0.75 SPEC/PITCH PLUG TAP-PDTEP5040060 >
5-MM X 0.50 HIGH SPEED SPECIAL PITCH PLUG TAP-PDTEP5040050 >
3-MM X 0.35 HIGH SPEED METRIC HAND AND SPIRAL POINT TAP-PDTEP5040030 >
2-MM X 0.45 PLUG TAP-PDTEP5040020 >
20-MM X 2.50 THREE FLUTE HAND TAP-PDTEP5037798 >
16-MM X 1.50 PLUG TAP-PDTEP5037787 >
16-MM X 2.00 PLUG TAP-PDTEP5037783 >
14-MM X 2.00 PLUG TAP-PDTEP5037775 >
Recently Viewed
1.9380"-ROUND BORE AG BEARINGS-IBIGW210PPB2>
Deep groove ball bearing
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
3 GROOVE A-BELT SHEAVES-BRW3TA40 >
U1-5 SPLIT TAPER BUSHING, 5" BORE, 1-1/4" X 5/8" KEYWAY-BRWU15 >
Bore Diameter (Inner): 90 mm Outside Diameter: 190 mm Width: 43 mm Basic Dynamic Load Rating: 151 kN (33,946 lb.)Basic Static Load Rating: 108 kN (24,279 lb.)Limiting Speed: 4,800 r/min Reference Speed: 7,500 r/min weight: Approx. 4.96 kg (11.18 lbs.)
NOTCHED GRIP V-BELTS-PIXPX126>
