Sockets

The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handle (Cat. No. 32308).

The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handles (Cat. Nos. 32303 and 32304).

1/4" SQUARE DRIVE SOCKET 3/16" X 7/8"-APXM1E06 >

1/4" F SQ DR SOCKET 1/4" F HEX 6-PT-APXM1E08>

1/4" SQUARE DRIVE SOCKET 5/16" X 7/8"-APXM1E10 >

1/4" SQUARE DRIVE SOCKET 5/16" X 7/8"-APXM1E11 >

1/4" X 7/8" FOR SELF DRILLING & TAPPING SCREWS 6-PT DRIVE SOCKET-APXM1P08 >

5/16" X 7/8" MAGNETIC 6PT. DRIVE SOCKET FOR SELF DRILLING & TAPPING SCREWS-APXM1P10 >

1-1/32" X 1" MAGNETIC 6PT. DRIVE SOCKET FOR SELF DRILLING & TAPPING SCREWS-APXM1P11 >

3/8" X 1" MAGNETIC, STANDARD LENGTH, 6" PT.DRIVE SOCKET-APXM1112 >

1/4" X 3/8" 6-PT. MAGNETIC DRIVE SOCKET-APXM3P08 >

3/8" X 1-1/4" X 3/8' SQUARE MAGNETIC DRIVE SOCKET, SHORT & STANDARD LENGTH-APXM3112 >

Socket Type: 6-Point

Hex Opening: 1-1/2''

Overall Length: 1-1/2''

Nose End Diameter: 13/16''

Drive End Diameter: 13/16''

Opening Depth: 11/32''

Socket Type: 6-Point

Hex Opening: 1-1/2''

Overall Length: 1-1/2''

Nose End Diameter: 15/16''

Drive End Diameter: 15/16''

Opening Depth: 7/16''

7/16" X 3/8" SQUARE MAGNETIC THIN WALL DRIVE SOCKET, LONG LENGTH-APXM3514 >

5/16" X 1-1/2" X 1/2" SQUARE MAGNETIC DRIVE SOCKET, STANDARD LENGTH-APXM5110 >

3/8" X 1-1/2" X 1/2" SQUARE DRIVE MAGNETIC SOCKET, STANDARD LENGTH-APXM5112 >

1/2" X 1-1/2" X 1/2" SQUARE DRIVE MAGNETIC SOCKET, STANDARD LENGTH-APXM5116 >

1/2" SQ DR SOCKET 1/2" HEX 3-1/4" OAL-APXM5316>

Socket Type: 6-Point

Hex Opening: 7mm

Overall Length: 22.2mm

Nose End Diameter: 11.9mm

Drive End Diameter: 12.7mm

Opening Depth: 4.8mm

3/8" 6-POINT 3/8"-DRIVE SOCKET - APXMB3212>

Apex MHA 510 5/16" Magnetic Standard Socket with 1/4" Square Drive-apxmha510 >

The MILWAUKEE® 1/2" Drive 7/8" SAE 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. The 1/2" drive sockets are wrench-ready and feature an innovative design with four parallel flat sides to deter rolling. SAE socket sizes are stamped into the flats for better visibility. Optimized socket geometry helps reduce bolt rounding and stripping.

The SHOCKWAVE™ lineman's 3-in-1 distribution utility socket provides more secure, efficient fastening in all fastening environments and orientations. The socket features a 3-in-1 square design for single sided fastening, eliminating the drop hazard of removing the socket from the adapter to change sizes. The push and twist barrel lock allows for secure, one-handed size changes, even while wearing gloves. The socket features an interior debris shield that resists interior rust and corrosion from dirt, wood chips and moisture from the jobsite.