Putty Knives
HANDLE IS ERGONOMIC DESIGN MOLDED OF POLYPROPYLENE. HIGH-QUALITY CARBON STEEL BLADES WITH SOFT-GRIP HANDLE. FULL TANG BLADES ARE SECURED TO THE HANDLE FOR MAXIMUM STRENGTH. STEEL HEAD FOR LIGHT HAMMERING. EACH HIGH-TECH HANDLE HAS A MOLDED COLOR INSERT CODED TO MATCH THE BLADES: RED FOR STIFF, BLUE FOR FLEX, AND YELLOW FOR FULL FLEX.
-JWH774820>
4" FLEX STEEL BROAD PUTTY KNIFE-JWH774847>
6" FLEXIBLE PUTTY KNIFE-JWH774855>
RETRACTABLE RAZOR BLADE SCRAPER-JWH774871 >
THE HEAVY-DUTY PAINT SCRAPER HAS A DUAL MOLDED, SOFT GRIP HANDLE. 4-EDGE BLADES ARE MADE OF HEAT-TREATED, HIGH CARBON STEEL AND FEATURE TWO SCRAPING EDGES FOR AGGRESSIVE SCRAPING AND TWO EDGES FOR FINER SCRAPING. THE SCRAPER CAN BE USED FOR REMOVING PAINT AND OTHER RESIDUE FROM WOOD.
JWH775010 >
2" PLASTIC PUTTY KNIFE-JWH775533 >
1-1/2" PLASTIC PUTTY KNIFE-JWH775541 >
A LOW COST, PLASTIC PUTTY KNIFE THAT IS EXTREMELY FLEXIBLE AND RETAINS A CLEAN, SHARP EDGE. IT IS NOT AFFECTED BY MOST SOLVENTS. GREAT FOR SPACKLE, WATER PUTTY, CRACK FILLER, STUCCO, DRYWALL PATCH, CAULK AND WINDOW PATCH.
-JWH775576 >
4" PLASTIC PUTTY KNIFE-JWH775592 >
1-1/2" FLEXIBLE PUTTY KNIFE-JWH775886 >
1-1/2" STIFF PUTTY KNIFE-JWH775894 >
4" STIFF PUTTY KNIFE STAINLESS STEEL SCRAPER-JWH775967 >
6" FLEXIBLE PUTTY KNIFE-JWH775991 >
3" PLASTIC PUTTY KNIFE SPREADER-JWH786470 >
3" V-NOTCHED SPREADER-JWH786489>
3/PK 2" 4" 6" POLY PUTTY KNIFE-JWH786577 >
3-PIECE DISPOSABLE SCRAPER-JWH786733 >
THE UTILITY RAZOR SCRAPER IS IDEAL FOR REMOVING PAINT AND OTHER RESIDUE FROM GLASS, TILE, WALLS, FLOORS, METAL AND OTHER SMOOTH SURFACES. THE DURABLE POLYPROPYLENE HANDLE IS COMFORTABLE AND LONG-LASTING. REMOVE THE END CAP TO STORE THE EXTRA BLADES WITH THE HANDLE.
-JWH790931 >
REPLACEMENT BLADE FOR 791343-JWH791325 >
THE GLASS & TILE SCRAPER FEATURES A COMFORTABLE HANDLE AND A 4" BLADE FOR SCRAPING PAINT AND OTHER RESIDUE FROM GLASS. THE WIDE BLADES REDUCT THE TIME NEEDED FOR SCRAPING PROJECTS AND ARE EASIER AND SAFER TO CHANGES. EACH SCRAPER COMES WITH 1 BLADE.
-JWH791343>
3" BENT SCRAPER WITH THREADED HANDLE-JWH791352>
MADE FROM DURABLE HIGH CARBON STEEL, 3-NOTCH INCLUDES 5 BLADES
-JWH792187 >
THE FLAT SCRAPER WITH SOFT GRIP HANDLE FEATURES A THICK, TEMPERED 3" STEEL BLADE WITH CHISEL EDGE FOR TOUGH JOBS. THE HEAVY-DUTY ERGONOMIC HANDLE HAS FINGER GRIPS FOR EASIER USE AND A BETTER GRIP WHEN WET. IT IS THREADED TO ACCEPT STANDARD THREADED EXTENSION POLES FOR HARDER TO REACH SCRAPER JOBS AND HAS A SCREW OUT, DIE CAST HAMMER END.
-JWH794075>
BRASS SCRAPERS WITH HANDLE-NGKB45 >
Recently Viewed
Klein® 32799 Pro Impact Power Bit Set, #1, #2, #3, 3/16 in, 1/4 in Phillips®/Slotted/Square Point, 5-1/2 in OAL, 1/4 in, 5/16 in, 3/8 in, S2 Steel
Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.
BLACK MIGHTY MARKER PAINT MARKER 00116 - PM16BLK >
IVORY WALLPLATE SCREW--EACH-JWH525863>
RADIAL BRISTLE BRUSH/WHEEL-MMM27605>
GREEN MIGHTY MARKER PAINT MARKER 00516 - ARRPM16G >
Browning® 1069335 Split Taper Bushing, 11/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
