Standard Screwdrivers
5/16" X 6" STANDARD TIP SQUARE SHANK SCREWDRIVER-ARS66547 >
3/8" X 10" STANDARD TIP SQUARE SHANK SCREWDRIVER
3/16" X " 3" CABINET TIP ROUND SHANK SCREWDRIVER
3/16" X 6" CABINET TIP, ROUND SHANK SCREWDRIVER-ARS66564 >
3/16" X 8" CABINET TIP ROUND SHANK SCREWDRIVER
3/16" X 10" CABINET TIP ROUND SHANK SCREWDRIVER
5/32" X 3" STANDARD TIP OFFSET SCREWDRIVER
1/4" X 4" STANDARD TIP OFFSET SCREWDRIVER
5" SLOTTED SCREW STARTERS-ARS66924 >
9" SLOTTED SCREW STARTERS
The Armstrong Tools 66933 (also referenced under part numbers 66-933 or ARS66933) is a vintage, high-quality 5-inch Phillips screw starter designed for manual industrial applications. Armstrong Tools was a prominent American manufacturer known for its heavy-duty hand tools before its parent group phased out the brand name.
#2 STUBBY SCREWDRIVERS
5/16" X /-3/4" STUBBY SCREWDRIVER
Bondhus® 10610 Ball End Standard Length Screwdriver, 3/16 in Ball End Hex Point, 8 in OAL, Thermoplastic/Soft Rubber Handle, ProGuard™
Bondhus® 10610 Ball End Standard Length Screwdriver, 3/16 in BallDriver® Hex Point, 8 in OAL, Thermoplastic/Soft Rubber Handle, ProGuard™
Bondhus® 3764 Extra Long Screwdriver, 5 mm BallDriver® Point, 370 mm OAL, Rubber Handle, ProGuard™
Bondhus® 3764 Extra Long Screwdriver, 5 mm BallDriver® Point, 370 mm OAL, Rubber Handle, ProGuard™
Bondhus® 3768 Extra Long Screwdriver, 6 mm BallDriver® Point, 383 mm OAL, Rubber Handle, ProGuard™
Bondhus® 3768 Extra Long Screwdriver, 6 mm BallDriver® Point, 383 mm OAL, Rubber Handle, ProGuard™
1/4" X 6" SQUARE SHANK SCREWDRIVER
Round shaft
Wide tip easily turns damaged heads
Tapered, torque-enhancing cushion grip handle
Interlocks with durable core, provides a more powerful, comfortable grip
Crescent® 21436 2000 Mechanic's Screwdriver, 5/16 in Slotted Point, 11 in OAL
Crescent® 21436 2000 Mechanic's Screwdriver, 5/16 in Slotted Point, 11 in OAL
Crescent® 22433 2000 Electrician's Screwdriver, 3/16 in Slotted Point
Crescent® 23434 2000 Electrician's Screwdriver, 1/4 in Slotted Point
Crescent® 23436 2000 Electrician's Screwdriver, 5/16 in Slotted Point
Crescent® CS144 Screwdriver, 1/4 in Slotted Point, 4 in OAL, Acetate Handle, Polished Chrome, ASME B107.600-2008
Crescent® offers a complete line of extremely durable acetate handled drivers that are temperature and UV resistant. Designed specifically for electricians, tradesmen and serious DIY users.
Crescent® CSD58V Screwdriver, 3/8 in Slotted Point, Vanadium Steel Shank, Black Oxide/Polished Chrome
Crescent® CSD58V Screwdriver, 3/8 in Slotted Point, Vanadium Steel Shank, Black Oxide/Polished Chrome
Recently Viewed
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Plumb® 11405 Regular Claw Hammer, 13 in OAL, Polished/Smooth Face Surface, 20 oz Steel Head, Curved Claw, Fiberglass Handle
Plumb® 11405 Regular Claw Hammer, 13 in OAL, Polished/Smooth Face Surface, 20 oz Steel Head, Curved Claw, Fiberglass Handle
1/2" -FEMALE PIPE THREAD GALVANIZED FLOOR FLANGES-FIT1/2GFF >
GEARWRENCH® 81655 Long Length Open End Combination Wrench, 7/16 in Wrench, 12 Points, 15 deg Offset, 7.29 in OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
