Nutdrivers
KLEIN 646-7/16 7/16" X 6"-shaft Cushion Grip Nut Driver
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Klein Tools 1/4" X 6"-SHAFT CUS/GRIP NUTDRIVER KLE 646-1/4
Get to those deeply recessed nuts and bolts with Klein® hollow shank nut driver. The full hollow 6 in shaft fits over extra long bolts and studs for most applications including stacked circuit boards. The comfortable Cushion-Grip allows for greater torque and enables tool to be used for hours without fatigue.
Klein Tools 5/16" HEX NUTDRIVERS KLE 630-5/16
Klein has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident® quickly identifies nut driver and size.
KLEIN TOOLS 630-1/2-INS Insulated 1/2'' Nut Driver Hollow Shank
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-1/21/2-Inch Nut Driver, 3-Inch Shaft, Cushion-Grip™
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/4 1/4-Inch Nut Driver 3-Inch Shaft Cushion-Grip™
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/4-INS Insulated 1/4'' Nut Driver Hollow Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-11/32 11/32-Inch Nut Driver 3-Inch Cushion-Grip™
Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Grip™ handle allows for greater torque and comfort
KLEIN TOOLS 630-11/32-INS Insulated 11/32'' Nut Driver Hollow
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-3/16-INS Insulated 3/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-3/163/16-Inch Nut Driver, 3-Inch Hollow Shaft, Cushion-Grip™
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Grip™ handle for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-3/8 3/8-Inch Nut Driver with 3-Inch Hollow Shaft
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-5/16 5/16-Inch Nut Driver Cushion-Grip™ 3-Inch Shaft
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-5/16-INS Insulated 5/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-5/8-Ins Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-9/16-INS 9/16-Inch Nut Driver 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
KLEIN TOOLS 646-1/2 1/2-Inch Nut Driver with 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 646-1/4 1/4-Inch Nut Driver with 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 646-1/4-M 1/4" Magnetic Tip Nut Driver
Exclusive hollow shaft design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts
Hollow shaft facilitates work on bolt applications
Cushion-Grip handle allows for greater torque and comfort
Handle end is color-coded for easy identification
Internal flanges provide solid, twist-resistant shank anchor
KLEIN TOOLS 646-3/8-M 3/8-Inch Nut Driver, 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 646-5/16 5/16-Inch Nut Driver, 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS S-126 3/8-Inch Nut Driver, 6-Inch Hollow Shaft
Nut Driver reaches into deep recesses
Fits over long bolts and studs
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Made in USA
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS S-86-M 1/4-Inch Magnetic Nut Driver, 6-Inch Shank
Nut Driver with powerful nut-holding magnet built into shank
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Chrome-plated shaft helps prevent corrosion
Made in USA
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Klein® 32807MAG 7-in-1 Multi-Bit Nutdriver, 1/4 in, 5/16 in, 11/32 in, 3/8 in, 1/2 in, 7/16 in, 9/16 in, Black Cushion Grip Handle
This Klein Screwdriver / Nut Driver is seven sizes in one tool. All sizes allow for easy, one-handed driving. The sizes are interchangeable ensuring you have the size you need when you need it. Color coded shaft ends make it easy to identify the size. Increase your productivity and lighten your load with this multi-nut driver.
Recently Viewed
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
HCI Preferred Supplier 46131 Shut-Off Cock, 1/4 in Nominal, Compression x MIP End Style, Forged Brass Body
HCI Preferred Supplier 46131 Shut-Off Cock, 1/4 in Nominal, Compression x MIP End Style, Forged Brass Body
6-32" X 1" USS SOCKET SET SCREWS-HOL32068>
EATON 10250TC2N Blank Heavy Duty Oiltight/Watertight Operator Lens, 30.5 mm, NEMA 1/2/3/3R/4/4X/12/13/IP65 NEMA Rating, Round Shape, Plastic
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
2120 / 3 in Pitch, Carbon Steel Material - Chain Construction Roller Link - Chain Standard ANSI
RIDGID® 92515 T-412 Double Cutter, 2-1/2 in, Steel, For Use With: Model K-7500 Drain Cleaning Machine
RIDGID® 92515 T-412 Double Cutter, 2-1/2 in, Steel, For Use With: Model K-7500 Drain Cleaning Machine
