Wire Tong Accessories

Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20

Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32

Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24

Works with aircraft, EHS, messenger and guy strand cable
Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Made in USA
For larger conductors, see our grips with round inside-jaw contour

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

Forged hook with 5/8-Inchg (1.6 cm) Eye I.D. and 1-7/8-Inch (4.8 cm) Throat Opening
Maximum safe load 750-pounds (340 kg)
Standard on Klein Block & Tackle Packages (Cat. Nos. 1802-30 and H1802-30)
Made in USA
These are NOT occupational protective devices. NOT for human support

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

2" COPPER ALLIGATOR CLIPS

2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)

2-3/8" COPPER ALLIGATOR CLIPS (EA)

2-3/8" STEEL ALLIGATOR CLIPS (EA)

1-QT LUBRICANT-KLE51000 >

1-3/32" STEEL MINI-GATOR CLIPS

Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick

Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability

RED CLAMP-AID UP TO 1/2" PK/20-GVICLAMPAID >

CORD AND CABLE CONNECTOR, 1-1/4" HUB, 1-1/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87125S >

CORD AND CABLE CONNECTOR,1" HUB, 15/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87100 >

CORD AND CABLE CONNECTOR, 1" HUB, 15/16" X 1-3/4, .750 - .875 CABLE RANGE-APLCG75100 >

CORD AND CABLE CONNECTOR, 3/4" HUB 7/8" X 1-38, .625 - .750 CABLE RANGE-APLCG6275 >

CORD AND CABLE CONNECTOR,1" HUB, 15/16" X 1-3/8, .625 - .750 CABLE RANGE-APLCG62100 >

CORD AND CABLE CONNECTOR, 1" HUB, 15/16" X 1-3/8, .500 - .625 CABLE RANGE-APLCG50100 >

CORD AND CABLE CONNECTOR, 3/4" HUB, 7/8" X 1-1/4, .250 - .375 CABLE RANGE-APLCG2575 >

CORD AND CABLE CONNECTOR, 3/4" HUB, 7/8" X 1-1/4, .125 - .250 CABLE RANGE-APLCG1275 >