TRANSFER PUMPS
15198 Fr-1210-c Telescoping 1" Steel Suction
FR-1210-C TELESCOPING 1" STEEL SUCTION PIPE - TUT15198>
1538 3/4" Manual Fuel Nozzle With Hook Good For High Flowing
3/4" MANUAL FUEL NOZZLE WITH HOOK GOOD FOR HIGH FLOWING APPLICATIONS-TUT1538 >
800-C 3 Wheel Mechanical 3/4" Meter Has A Large Easy To Read Display. Flow Ports Can Be Positioned Vertically Or Horizontally. The Pump Is Designed For Transfer Pumps With A Flow Rate Of 5-20
3 WHEEL MECHANICAL 3/4" METER HAS A LARGE EASY TO READ DISPLAY. FLOW PORTS CAN BE POSITIONED VERTICALLY OR HORIZONTALLY. THE PUMP IS DESIGNED FOR TRANSFER PUMPS WITH A FLOW RATE OF 5-20 GPM-TUT800C >
807-CMK 3/4" 5-20 Gpm Fuel Meter With A Large Easy To
3/4" 5-20 GPM FUEL METER WITH A LARGE EASY TO READ DISPLAY-TUT807CMK >
901 4-wheel Fuel Meter With A 1" Inch Outlet. Designed For Transfer Pumps With A Flow Of 6-40
4-WHEEL FUEL METER WITH A 1" INCH OUTLET. DESIGNED FOR TRANSFER PUMPS WITH A FLOW OF 6-40 GPM-TUT901 >
901-1.5 1-1/2" 6-40 Gal Per Minute Flow Meter. This Pump Should Be Used For Short Periods Of Time--not Over 30 Minutes-tut9011.
1-1/2" 6-40 GAL PER MINUTE FLOW METER. THIS PUMP SHOULD BE USED FOR SHORT PERIODS OF TIME--NOT OVER 30 MINUTES-TUT9011.5 >
F-1810-PM-0 Replacement Filter For 1200ktf7018
REPLACEMENT FILTER FOR 1200KTF7018 TOOTHUTF1810PM0 >
F-3144 3/4"-female Pipe Thread Automatic Gas And
3/4"-FEMALE PIPE THREAD AUTOMATIC GAS AND FUEL NOZZLE-TUTF3144 >
F-4010-PM0 40-gpm 10-micron Particle
40-GPM 10-MICRON PARTICLE FILTER-TUTF4010PM0 >
FH-3412-SW 3/4" X 12' Fuel Hose That Dispenses Diesel Fuel, Gasoline, Grease, Kerosene And Petroleum Oils. The Fill-rite Hose Is A Blend Of Nit Rile And Pvc External
3/4" X 12' FUEL HOSE THAT DISPENSES DIESEL FUEL, GASOLINE, GREASE, KEROSENE AND PETROLEUM OILS. THE FILL-RITE HOSE IS A BLEND OF NIT RILE AND PVC EXTERNAL MATERIALS-TUTFH3412SW >
FR-1210-C 12-volt Tuthill Fuel/transfer
12-VOLT TUTHILL FUEL/TRANSFER PUMP-TUTFR1210C>
FRH-075-20 3/4" X 20' Fuel Transfer
3/4" X 20' FUEL TRANSFER HOSE-TUTFRH07520 >
IH-55-GCP-2 5.5-hp 2" Chemical/water
5.5-HP 2" CHEMICAL/WATER PUMP - WSCIH55GCP2>
Recently Viewed
3.25" -OOVERALL LENGTH COMPRESSION SPRING; MAXIMUM LOAD 43.59 LBS.-AJA32 >
AnvilĀ® 0310088000 FIG 1125 Reducer, Coupling, 1-1/4 x 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
MAXCO Inspire Seriesā¢ 100 Conn Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 1-1/4ā³ Pitch
2.25" -OVERALL LENGTH EXTENSION SPRINGS; MAXIMUM LOAD 4.45 LBS.-AJA3 >
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
10-MM X 1/4" 6-PT STANDARD SQUARE DRIVE SOCKET-APX10MM11 >
