Flat Washers
309-075-THICK 3/4" Extra Thick GR-8 Flat Washers
3/4" Extra Thick GR-8 Flat Washers
309-062-THICK 5/8" Extra Thick GR-8 Flat Washers
5/8" Extra Thick GR-8 Flat Washers
309-050-THICK 1/2" Extra Thick GR-8 Flat Washers
1/2" Extra Thick GR-8 Flat Washers
309-044-THICK 7/16" Extra Thick GR-8 Flat Washers
7/16" Extra Thick GR-8 Flat Washers
309-038-THICK 3/8" Extra Thick GR-8 Flat Washers
3/8" Extra Thick GR-8 Flat Washers
309-032-THICK 5/16" Extra Thick GR-8 Flat Washers
5/16" Extra Thick GR-8 Flat Washers
308-112 1-1/8" SAE Yellow Zinc GR-8 Flat Washers
1-1/8" SAE Yellow Zinc GR-8 Flat Washers
308-032-THICK 5/16" SAE Thick GR-8 Flat Washers
5/16" SAE Thick GR-8 Flat Washers
Recently Viewed
1/4" X 1/2" SAE F/H S/H CAPSCREWS-HOL61018>
SHELF T-POSTS-PNCH0066C>
IDEAL Yellow 77 Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32Ā°F to 130Ā°F (0Ā°C to 54Ā°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
GreenleeĀ® Slug-BusterĀ® 36282 Round Standard Replacement Knockout Punch, 1-7/32 in Dia
GreenleeĀ® Slug-BusterĀ® 36282 Round Standard Replacement Knockout Punch, 1-7/32 in Dia
Square Dā¢ OsiSenseĀ® 9070EL1D9 Type EL Industrial Wire Wound Control Transformer With 24 in Lead, 440/460/480 V AC Primary, 110/115/120 VAC Secondary, 50 VA Power Rating, 50/60 Hz, 1 Phase
The Square Dā¢ by Schneider Electric Type EL Industrial Control Transformers is a single phase 150VA transformer designed for 240VAC primary with a 120VAC secondary. These are only available for single voltage primary and single voltage secondary applications. This Industrial Control transformer, is 1 phase, with a rated voltage of 50 VA. This transformer, has primary voltages of 480/440/460 V and secondary voltages of 115/120/110 V. This product has a temperature rise of 55 Ā°C and a insulated temperautre of 105 Ā°C. This product complys to UL listed,CSA & CE standards. This product comes with a 610 m lead and has screw clamp terminals connections.
HCI Preferred Supplier 28189 Reducer Coupling, 3/4 x 1/2 in Nominal, FNPT End Style, Brass
HCI Preferred Supplier 28189 Reducer Coupling, 3/4 x 1/2 in Nominal, FNPT End Style, Brass
