ROUND BEND
019 CHICAGO HARDWARE 3/8" X 1-1/2" ZINC U-BOLTS
Type: Round Bend U-Bolt with two hex nuts Material: Low carbon steel Finish: Zinc-plated (Part #50080-7) or Hot Galvanized (Part #53080-4) Thread Size: 3/8"-16 UNC Inside Width: 1-1/2 in Inside Length: 2-1/2 in Thread Length: 1-1/4 in Pipe Size: 1 in
022 CHICAGO HARDWARE 3/8" X 2-1/2" ZINC U-BOLTS
Thread Size: 3/8"-16Inside Width: 2-1/2 inches Inside Length: 3-1/8 inches Material: Low carbon steel Finish: Zinc plated (also available in stainless steel configurations)
023-HG CHICAGO HARDWARE 3/8" X 3" GALVANIZED U-BOLTS
Thread/Diameter (A): 3/8"-16Pipe Size: 3 inches Inside Width / Inner Diameter (C): 3-5/8 inches Inside Length (B): 2-1/2 inches Thread Length (T): 1-1/4 inches Finish: Hot Galvanized (HG) with two hex nuts included Weight: 26 lbs. per 100 pieces
028 CHICAGO HARDWARE 4" PLATED U-BOLTS
Thread Size: 3/4"-10Shank Length: 2 inches Eye Dimensions: 1-1/2" Inner Diameter (ID) | 2-13/16" Outer Diameter (OD)Working Load Limit (WLL): 6,000 lbs. (Straight lift) | 1,500 lbs. (45-degree angle) Pattern: Shoulder pattern (designed to support angular loads better than plain eye
029 CHICAGO HARDWARE 5" PLATED U-BOLTS (PART # 50116-3)
nches Thread Size: 1/2"-13Stock / Part Numbers: Part No. 50116 3 (Plain/Standard) or 53116 0 for 029HG (Hot
222-075 NATIONAL HARDWARE PRODUCTS
1/4" X 3/4" X 2.5" U-BOLT WITH PLATE-NTL222075 >
222-232 NATIONAL HARDWARE PRODUCTS
1/4" X 3/4" X 2.5" U-BOLT WITH PLATE-NTL222232 >
Recently Viewed
7/16"-20 SAE GR-8 Hex Nuts
Browning® 1002393 TB Series Type 13 Web Multiple Sheave With Split Taper Bushing, 3/4 to 2-11/16 in Split Taper Bore, 8.28 in OD, 2 Grooves, 7.8 in (A)/8.3 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
