SOCKET HEAD CAP SCREWS
4-MM X 20-MM S/H CAPSCREWS-HOL76076>
4-MM X 50-MM S/H CAPSCREWS-HOL76100>
5-MM X 10-MM S/H CAPSCREWS-HOL76108>
M6" X 12" SOCKET HEAD CAP SCREWS-HOL76160 >
6-MM X 20-MM S/H CAPSCREWS-HOL76172>
M6" X 25 SOCKET HEAD CAP SCREWS-HOL76176 >
6-MM X 30-MM S/H CAPSCREWS-HOL76180>
8-MM X 25-MM S/H CAPSCREWS-HOL76240>
M10X25 SOCKET HEAD CAP SCREWS-HOL76300 >
10-MM X 1.50 X 75-MM S/H CAPSCREWS-HOL76340>
10-MM X 1.50 X 80-MM S/H CAPSCREWS-HOL76344>
M12" X 40 SOCKET HEAD CAP SCREWS-HOL76372 >
12-MM X 1.75 X 60-MM S/H CAPSCREWS-HOL76388>
16-MM X 40-MM S/H CAPSCREWS-HOL76432>
16-MM X 50-MM S/H CAPSCREWS-HOL76440>
6-32" X 1-1/4" S/H CAPSCREWS-HOL86288>
8-32" X 2" S/H CAPSCREWS-HOL86364>
10-MM X 1.50X120-MM SOCKET HEAD CAPSCREW-MET91210120 >
10-MM X 1.50X130-MM SOCKET HEAD CAPSCREW-MET91210130 >
10-MM X 1.50X140-MM SOCKET HEAD CAPSCREW-MET91210140 >
10-MM X 1.50X150-MM SOCKET HEAD CAPSCREW-MET91210150 >
10-MM X 1.50X160-MM SOCKET HEAD CAPSCREW-MET91210160 >
10-MM X 1.50X200-MM SOCKET HEAD CAPSCREW-MET91210200 >
10-MM X 1.50X220-MM SOCKET HEAD CAPSCREW-MET91210220 >
Recently Viewed
Crescent® 8658FHB Replacement Spring, For Use With Crescent H.K. Porter 8690 Series Cutters
Crescent® 8658FHB Replacement Spring, For Use With Crescent H.K. Porter 8690 Series Cutters
Greenlee® 00595 Fish Line, 85 lb Tensile Strength, 2150 ft L, Nylon, For Use With Mighty Mouser® Blow Gun
Greenlee® 595 Fish Line, 85 lb Tensile Strength, 2150 ft L, Nylon, For Use With Mighty Mouser® Blow Gun
Made of high quality steel (chrome-molybdenum); thorough and exact heat treatment insures the correct balance of strength and durability
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Allows up to 20% more torque to be applied than on standard hex impact sockets
Lifetime warranty
This fractional impact socket features our high torque drive. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.
MAXCO Inspire Series™ 40 Offset Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 1/2″ Pitch
