Sheet Metal Screws
#8 X 1" Stainless Steel Flat Head Phillips Sheet Metal Screw
#8 X 1" Stainless Steel Oval Head Phillips Sheet Metal Screw
#8 X 1" Stainless Steel Pan Head Phillips Sheet Metal Screw
#8 X 2-1/2" Flat Head Phillips Sheet Metal Screw
#8 X 2-1/2" Hex Head Slotted Sheet Metal Screws With Washer
#8 X 2-1/2" Pan Head Combo Sheet Metal Screws
#8 X 2-1/2" Pan Head Phillips Sheet Metal Screw
#8 X 2" Pan Head Combo Sheet Metal Screws
#8 X 2" Pan Head Phillips Sheet Metal Screw
#8 X 2" Stainless Steel Flat Head Phillips Sheet Metal Screw
#8 X 3/4" Black Flat Head Phillips Sheet Metal Screw
#8 X 3/4" Flat Head Phillips Sheet Metal Screw
#8 X 3/4" Hex Head Slotted Sheet Metal Screws With Washer
#8 X 3/4" Pan Head Combo Sheet Metal Screws
#8 X 3/4" Pan Head Phillips Sheet Metal Screw
#8 X 3/4" Pan Head Slotted Sheet Metal Screws
#8 X 3/4" Phillips Head Sheet Metal Screws
#8 X 3/4" Stainless Steel Flat Head Phillips Sheet Metal Screw
#8 X 3/4" Stainless Steel Oval Head Phillips Sheet Metal Screw
#8 X 3/8" Hex Head Slotted Sheet Metal Screws With Washer
#8 X 3/8" Pan Head Combo Sheet Metal Screws
#8 X 3/8" Pan Head Phillips Sheet Metal Screw
#8 X 3/8" Pan Head Slotted Sheet Metal Screws
#8 X 3" Flat Head Phillips Sheet Metal Screw
Recently Viewed
Extension, 3/8 in Drive, 10 in OAL
HYDRAULIC HOSE ENDS HY-0402-MS 108180-DAY2MS4SB >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
The Crosby HG-227 Jaw & Eye Turnbuckles feature a forged jaw on one end and an elongated eye on the other, providing flexibility for connecting to clevis pins, eye bolts, or shackles. Built for straight-line tensioning, these turnbuckles are ideal for industrial, marine, and structural applications requiring dependable strength and fatigue performance. All components are hot-dip galvanized for corrosion resistance and meet stringent ASME and Federal standards.
Key Features
Forged and heat-treated construction ensures superior strength and toughness.
Jaw ends use bolt-and-nut assemblies for 1/4"–5/8" sizes, and pin-and-cotter connections for 3/4"–2-3/4" sizes.
Elongated forged eye for easy system integration and reduced stress concentration.
Modified UNJ thread on end fittings; body has UNC threads for consistent engagement.
Hot-dip galvanized for maximum corrosion resistance.
Browning® 1108331 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 19/32 in Dia Bore, 5.057 in OD, #40 Chain, 30 Teeth, 1/2 in Pitch, Steel
#80 ROLLER CHAIN OFFSET LINKS-BRWJ80O/SCORDLESS >
