EXTERNAL
ANR 1400-293 EXTERNAL CIRCLIP FOR 2.93" SHAFT DIAMETER UN-SPRUNG DIAMETER 2.717"
2-15/16" EXTERNAL RETAINING RING-ANR1400293 >
ANR 1400-300 3" RETAINING RING FOR USE WITH 9,000 TO 12,000LB. AXLES. FITS 16" TO 17-1/2" WHEELS 8 PM 6-1/2 BOLT CIRCLE. USE WITH 6-109 WHEEL NUTS
EXTERNAL CIRCLIPS OR SNAP RINGS PRODUCED BY COILING OR FORMING AN EVEN SECTIONED WIRE. THEIR PERFORMANCE IS GENERALLY INFERIOR TO THE TAPERED SECTION 1400 TYPES DUE TO THE UNEVEN STRESSES WITH THE RINGS. WHEN FITTED, SNAP RINGS CANNOT CONTACT THE GROOVE FULLY BECAUSE OF THESE UNEVEN STRESSES.
-ANR1400300 >
ANR 1400-31 0.312 X 0.281 X 0.025 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140031 >
ANR 1400-3123.125 X 2.892 X 0.093 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400312 >
ANR 1400-315 3-5/32" EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400315 >
ANR 1400-325 3.25 X 3.006 X 0.093 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400325 >
ANR 1400-34 0.344 X 0.309 X 0.025 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140034 >
ANR 1400-350 3.50 X 3.237 X 0.109 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400350 >
ANR 1400-362 3.625 X 3.352 X 0.109 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400362>
ANR 1400-37 0.375 X 0.338 X 0.025 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140037 >
ANR 1400-375 3.75 X 3.468 X 0.109 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400375 >
ANR 1400-400 4" X 3.70" X 0.109" EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR1400400 >
ANR 1400-43 0.438 X 0.395 X 0.025 EXTERNAL RETAINING RINGS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140043 >
ANR 1400-75 0.75 X 0.693 X 0.042 EXTERNAL CIRCLIPS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140075 >
ANR 1400-93 0.938 X 0.867 X 0.042 EXTERNAL CIRCLIPS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140093 >
ANR 1400-98 0.984 X 0.91 X 0.042 EXTERNAL CIRCLIPS
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAPE IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
-ANR140098 >
ANR 1460-106 1.062 X 0.982 X 0.05 INTERNAL HEAVY DUTY RETAINING RING
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460106>
ANR 1460-112 1.125 X 1.041 X 0.05 INTERNAL HEAVY DUTY RETAINING RING
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
- ANR1460112>
ANR 1460-125 1.25 X 1.156 X 0.05 EXTERNAL CIRCLIPS
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460125>
ANR 1460156 1.1562 X 1.446 X 0.062 EXTERNAL RETAINING RING CIRCLIPS
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460156>
ANR 1460175 1.75 X 1.618 X 0.062 EXTERNAL RETAINING RING CIRCLIPS
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460175 >
ANR 1460193 RETAINING RING, INTERNAL, 0.062" THICK, HOUSING RING, FOR 1-15/16" BOR DIA., 0.062" THICK
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460193>
ANR 1460200 20 MM D1460 REINFORCED EXTERNAL RETAINING RING
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
-ANR1460200 >
ANR 146075 0.704" DIA, 1.120" OD, 0.078" HEAVY DUTY RETAINING RINGS
A RESILIENT METAL ITEM, CIRCULAR OR NEARLY CIRCULAR, WHICH IS DESIGNED TO BE INSERTED INTO AN INTERNAL OR EXTERNAL GROOVE AND RETAINED BY ITS OWN SPRING ACTION, OR IT MAY HAVE EXTERNAL PRONGS OR PROJECTIONS DESSIGNED TO BE INSERTED NTO A HOLE AND RETAINED BY SPRING ACTION OF THE PRONGS WHICH GRIP BY IMBEDDING INTO THE MATERIAL. -ANR146075 >
Recently Viewed
RIDGIDĀ® 32055 Long Replacement Strap, For Use With 31365 Strap Wrench, Polyurethane Strap
RIDGIDĀ® 32055 Long Replacement Strap, For Use With 31365 Strap Wrench, Polyurethane Strap
8"-W X 11"-D X 7"-H BLUE SHELF BIN - AKR30239B >
MARXMANā¢ 85389 398QI 1-Stage Type C Heavy Duty Screw Machine Aircraft Drill, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 135 deg Point, HSS
MARXMANā¢ 85389 398QI 1-Stage Type C Heavy Duty Screw Machine Aircraft Drill, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 135 deg Point, HSS
HEATER FUEL GAUGES-DYG2156000100 >
MORSEĀ® 14477 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 135 deg Point, HSS
MORSEĀ® 14477 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 135 deg Point, HSS
MARXMANā¢ 87138 139QI Aircraft Extension Drill, S Drill - Letter, 0.348 in Drill - Decimal Inch, 135 deg Point, HSS
MARXMANā¢ 87138 139QI Aircraft Extension Drill, S Drill - Letter, 0.348 in Drill - Decimal Inch, 135 deg Point, HSS
