GRADE 8.8
931-10-055 10-mm X 1.50x55-mm HEX
10-MM X 1.50X55-MM HEX HEAD CAPSCREW-MET93110055 >
931-10-045 10-mm X 1.50x45-mm HEX
10-MM X 1.50X45-MM HEX HEAD CAPSCREW-MET93110045 >
931-10-040 10-mm X 1.50x40-mm HEX
10-MM X 1.50X40-MM HEX HEAD CAPSCREW-MET93110040 >
931-10-035 10-mm X 1.50x35-mm HEX
10-MM X 1.50X35-MM HEX HEAD CAPSCREW-MET93110035 >
931-10-030 10-mm X 1.50x30-mm HEX
10-MM X 1.50X30-MM HEX HEAD CAPSCREW-MET93110030 >
931-10-025 10-mm X 1.50x25-mm HEX
10-MM X 1.50X25-MM HEX HEAD CAPSCREW-MET93110025 >
931-10-020 10-mm X 1.50x20-mm HEX
10-MM X 1.50X20-MM HEX HEAD CAPSCREW-MET93110020 >
931-10-016 10-mm X 1.50x16-mm HEX
10-MM X 1.50X16-MM HEX HEAD CAPSCREW-MET93110016 >
931-08-160 8-mm X 1.25x160-mm HEX
8-MM X 1.25X160-MM HEX HEAD CAPSCREW-MET93108160 >
931-08-150 8-mm X 1.25x150-mm HEX
8-MM X 1.25X150-MM HEX HEAD CAPSCREW-MET93108150 >
931-08-140 8-mm X 1.25x140-mm HEX
8-MM X 1.25X140-MM HEX HEAD CAPSCREW-MET93108140 >
931-08-120 8-mm X 1.25x120-mm HEX
8-MM X 1.25X120-MM HEX HEAD CAPSCREW-MET93108120 >
931-08-110 8-mm X 1.25x110-mm HEX
8-MM X 1.25X110-MM HEX HEAD CAPSCREW-MET93108110 >
931-08-080-ZINC 8-mm X 1.25x80-mm HEX
8-MM X 1.25X80-MM HEX HEAD CAPSCREW-MET93108080ZINC >
Recently Viewed
FHP V-BELT - JAS5L980>
PIX BX-52 IS A COGGED, CLASSICAL V-BELT 55" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
PIXBX52 >
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS320H075 >
TAPERED ROLLER BEARING CUP-NTN792 >
H-PITCHX58 TIMING BELT-JAS580H100 >
NOTCHED GRIP V-BELTOUTSIDE CIRCUMFERENCE 33"-PIXBX30 >
