CLAMPS
B-Line Pipe Clevis Hanger, Light Duty, Series: B3104, 1-1/4 in Pipe, 3/8-16 Rod, 2-1/2 in Thread, 250 lb Load, Specifications: 2-7/16 in Center of Pipe to Top of Hanger, Steel, Plain, 3-5/16 in H Dimensions
3" CLEVIS TYPE PIPE HANGERS
3-1/2" LIGHT DUTY CLEVIS PIPE HANGERS-
Product Length/Depth
4.38 in
Product Height
0.375 in
Product Width
2.755 in
Product Weight
0.29 lb
1-1/4" IPS STANDARD U-BOLT HOT DIP GALVANIZED WITH 4 HEX NUTS
B-Line U-Bolt, Standard, Series: B3188, Measurement System: Imperial, 1/4-20 Thread, 15/16 in Inside Width, Steel, 2-1/8 in Thread Length, Plain, 1/2 in Pipe
Standard U-Bolt, Stainless Steel, 1.5 in. Pipe, 3.75 H in.
Eaton B-Line series U-bolt, 13.4" H x 1" D, Steel, 5060 load, 1/4"-10 rod size, 4" thread len, 750 temp, U-bolt with 4 hex nuts
Product Length/Depth
16.94 in
Product Height
0.875 in
Product Width
14.625 in
Product Weight
6.607 lb
Certifications
UL Listed
Product Type
Standard U-bolt
B-Line U-Bolt, Standard, Series: B3188, Measurement System: Imperial, 2 in Pipe Size, Plain Steel U-Bolt w/ 4 Hex Nuts
2-1/2" Standard U-Bolt (Plain)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Plain
Standard U-Bolt with 4 Hex Nut, 304 Stainless Steel, 1/2 in. -13 Thread, 3 in. L Thread, 7.5 H x 3 D in.
Eaton B-Line series U-bolt, 3.63" H x 0.75" D, Steel, 675load cap, 1/2"-13 rod size, 2.125" thread len, 750 temp, U-bolt with 4 hex nuts
4" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
Description
–
5" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
B-Line Split Pipe Clamp, Hinged Extension, Series: B3198H, 1/2 in Pipe/Tube, 3/8-16 Rod, 180 lb, Malleable Iron, Plain, For Use With: Pipe Hanger and Mechanical Clamp
1 1/4" PLAIN SPLIT PIPE CLAMP-BLNB3198R11/4 >
1" STAINLESS STEEL SPLIT RING PIPE CLAMPS-
Eaton B-Line series ceiling flange, 0.5" H x 2.8750" L x 1.3750" W, Steel, 180 Lbs load cap, Ceiling flange
B3199R-3/8 PLN Ceiling Flange, 3/8-16 Thread, 180 lb Load, Malleable Iron, Plain
B-Line B3199RCT-1/2 Ceiling Flange, 1/2-13 Thread, 180 lb Load, Malleable Iron, Dura-Copperâ„¢, Import
For attaching a hanger or support rod to beams, ceilings or walls and mechanical miscellaneous fittings
B-Line Ceiling Flange, Series: B3199RCT, For Use With: 3/8-16 Rod, Malleable Iron, Dura Copperâ„¢ Coated, 2-7/8 in L x 1-3/8 in W x 7/16 in H, Import
EATON B-Line Beam Clamp, Right Angle, Series: B422, 1 in Conduit, 400 lb Load, Specifications: 7 ga THK, Low Carbon Steel, Zinc Plated, 2-7/8 in L Dimensions
1-1/2" ZINC RIGHT ANGLE CLAMPS
Recently Viewed
A-331-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" CLEVIS SLIP HOOKS
Working Load Limit (WLL): 9,000 lbs (4.50 Tons). Design Safety Factor: 4:1 minimum ultimate load. Material Construction: Forged alloy steel quenched and tempered. Compatible Chain: Optimized for Grade 70 transport chain. Dimensions: 1.69" throat opening width, 0.63" pin diameter, and roughly 2.75 lbs. total weight. Attachment Method: Clevis style with a quenched and tempered alloy load pin and cotter included.
Square Dâ„¢ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QOâ„¢/Homelineâ„¢ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
Tiger® 52003 Stem Mount Coated Abrasive Flap Wheel, 1 in Dia Wheel, 1/4 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
Tiger® 52003 Stem Mount Coated Abrasive Flap Wheel, 1 in Dia Wheel, 1/4 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
Leviton® Black & White® 50 A non-NEMA line of industrial grade locking blade devices feature rugged construction that resists impact, sunlight, chemicals and rough use. All contacts and blades are solid 1-piece construction for superior conductivity. Corrosion resistant versions feature nickel plated contacts and blades, plus stainless steel shrouds and screws. The ergonomic, fluted-body design with radial gripping edge is ideal for gripping and pulling. The unique cord clamp accepts a wide range of cord sizes, providing a secure grip without damaging the cord. And, they are backed by a limited lifetime warranty.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
HCI Preferred Supplier 20227 Universal Tube Nut and Sleeve, 1/8 in Nominal, Flareless End Style, CA360 Brass
HCI Preferred Supplier 20227 Universal Tube Nut and Sleeve, 1/8 in Nominal, Flareless End Style, CA360 Brass
