RIGID & IMC CONDUITS
1-1/2-ALUM ALLIED TUBE & CONDUIT 1-1/2" ALUMINUM RIDGID CONDUIT
1-1/2" ALUMINUM RIDGID CONDUIT
1-1/2" RIDGID ELECTRICAL CONDUIT (FT)-ATB11/2RIDGID>
1-1/4-ALUM ALLIED TUBE & CONDUIT 1-1/4" ALUMINUM CONDUIT
1-1/4" ALUMINUM CONDUIT
1-1/4" RIDGID ELECTRICAL CONDUIT (FT)-ATB11/4RIDGID>
1" ALUMINUM RIGID CONDUIT
1" RIDGID ELECTRICAL CONDUIT (FT)-ATB1RIDGID>
1/2-ALUM ALLIED TUBE & CONDUIT 1/2" ALUMINUM RIDGID CONDUIT
1/2" ALUMINUM RIDGID CONDUIT
1/2" RIDGID ELECTRIC CONDUIT (FT)-ATB1/2RIDGID>
2-1/2" RIDGID ELECTRICAL CONDUIT (FT)-ATB21/2RIDGID >
2" THINWALL RIDGID ELECTRICAL CONDUIT (FT)-ATB2RIDGID >
3" RIDGID ELECTRICAL CONDUIT (FT)-ATB3RIDGID >
3/4-ALUM ALLIED TUBE & CONDUIT 3/4" ALUMINUM RIDGID CONDUIT 3/4" ALUMINUM RIDGID CONDUIT 3/4" ALUMINUM RIDGID CONDUIT
3/4" ALUMINUM RIDGID CONDUIT
3/4" RIDGID ELECTRICAL CONDUIT (FT)-ATB3/4RIDGID >
4" OC CONDUIT 1-1/4"-APL403/4>
4" RIDGID ELECTRICAL CONDUIT (FT)-ATB4RIDGID >
Recently Viewed
5 Piece, Spiral Screw Extractor Set, Designed For Softer Materials Or Thin Walled Pieces Such As Pipes & Fittings, Design Eases Extraction Because It Does Not Expand The Material As You Remove It, Removes Both Left Hand & Right Hand Threaded Parts, Includes Extractors #1 Through #5.
Proto® TorquePlus™ J7208M Standard Length Socket, Metric, 3/8 in Square Drive, 8 mm
POWER COLLET FOR DEWALT 625 ROUTER-JAC33841>
3" X 8" TIE-ROD HYD/CYLINDERS>
4-1/2"X7/8"60G TYPE27 POLIFAN DISC
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
