NIPPLES
1/2" RIGID OFFSET ELECTRICAL NIPPLES-JWH502294>
1" BUSHED CONDUIT NIPPLE, 5/8" X 1/8"-APLCN100 >
1-1/4"-MPT BUSHED CONDUIT NIPPLES-APLCN125>
1-1/2" BUSHED CONDUIT NIPPLE, 5/8" 1/8"-APLCN150 >
2-1/2" BUSHED CONDUIT NIPPLE, 1-1/8" X 3/8"-APLCN250 >
3" BUSHED CONDUIT NIPPLE, 1-3/16" X 3/8"-APLCN300 >
1/2" BUSHED CONDUIT NIPPLE, 7/16" X 1/8"-APLCN50 >
1/2" INSULATED BUSHED NIPPLE, 7/16" X 1/8"-APLCN50I >
3/4" -MALE PIPE THREAD BUSHED CONDUIT NIPPLE, 1/5' X 1/8"-APLCN75 >
3/4" INSULATED BUSHED CONDUIT NIPPLE, 1/2" X 1/8"-APLCN75I >
1/2" BUSHED CONDUIT NIPPLES-APLCNN100>
1" ZINC OFFSET CONDUIT NIPPLES-APLRN100>
Recently Viewed
Armstrong® 13-925 Drive Extension, 3/4 in Tang Drive, 16 in OAL
Proto® J4277B Rear Axle Flange Foot, For Use With Proto-Ease™ Master Puller, 5/8-12 in Dia Shaft, 1-7/32 in Thread
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Dremel® Gemini® 125 Mounted Point, Pointed End, Cone Head, 1/4 in Dia Head, 1-1/2 in OAL, Standard Tooth
Dremel® Gemini® 125 Mounted Point, Pointed End, Cone Head, 1/4 in Dia Head, 1-1/2 in OAL, Standard Tooth
1.88 -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 2.47 LBS.-AJA72X >
ARMSTRONG 25-328 7/8" COMBINATION WRENCH FULL POLISH 6 POINT USA
BOX ENDS INCORPORATE A RADIUS CORNER DESIGN THAT ENGAGES THE FLATS OF THE FASTENER, NOT THE CORNERS, PROVIDING UP TO 15% -20% MORE TORQUE WHILE REDUCING FASTENER ROUNDING, ENHANCING THE TURNING OF WORK. BOX ENDS ARE OFFSET A TRUE 15 FOR CLEARING OBSTRUCTIONS AND KNUCKLE CLEARANCE ON FLAT SURFACES.
