Intermediate Metal Conduit (IMC)
Electroline 548710000 Threaded Intermediate Metal Conduit, 1/2 in Trade, 0.659 in ID x 0.815 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
Electroline 548810000 Threaded Intermediate Metal Conduit, 3/4 in Trade, 0.863 in ID x 1.029 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
Electroline 548910000 Threaded Intermediate Metal Conduit, 1 in Trade, 1.104 in ID x 1.29 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
Electroline 549010000 Threaded Intermediate Metal Conduit, 1-1/4 in Trade, 1.448 in ID x 1.638 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
Electroline 549110000 Threaded Intermediate Metal Conduit, 1-1/2 in Trade, 1.683 in ID x 1.883 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
Recently Viewed
Apex® SZ-12-A Socket Head Insert Bit, 3/16 in Hex Point, 1-3/8 in OAL, Steel
24 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4024X1 >
3" LB CONTAINER OF WALLBOARD JOINT COMPOUND-JWH266353 >
Drillco 31E160CC 3100E Adjustable Round Split Die, M16x2 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
IVORY WIRE CHANNEL ACCESSORY KIT-JWH506079 >
