Conduit Snap-In Blanks
Arlington NM902 Blank, 1 in, Plastic
Steel City® BL112-1 Snap-In Blank, 3/4 in, For Use With Rigid/IMC Conduit Fittings, Steel, Zinc Plated
Steel City® BL112-1 Snap-In Blank, 3/4 in, For Use With Rigid/IMC Conduit Fittings, Steel, Zinc Plated
Recently Viewed
WA30 Dodge® 228087 Taper-Lock Type W/WA Weld-On Hub, 4-1/4 in Bore, 5-1/2 in OD, 4 in Bolt Circle Diameter, 3 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
RBC® IR7214 Pitchlign® Heavy Duty Inner Ring, 7/8 in ID x 1-1/8 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
FLANGE UNITS-DOD023098>
G.L.HUYETT™ HLPG-0375-2000 Drilled Imperial Clevis Pin, 3/8 in Dia x 2-11/32 in OAL, 2 in L Usable, Low Carbon Steel, Zinc Clear
G.L.HUYETT™ HLPG-0375-2000 Drilled Imperial Clevis Pin, 3/8 in Dia x 2-11/32 in OAL, 2 in L Usable, Low Carbon Steel, Zinc Clear
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
