Main specs
-
-
Manufacturer Part Number
BU19
-
Specification
-
-
-
-
-
-
-
-
Outside Diameter
1-50/64 to 2-6/64 in
Features
-
4-bolt type with 2 gripping fingers and 2 clamp sections
-
Recommended for steam service up to 450 deg F
-
Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
-
Always tighten bolts to their specified torque value
-
Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
-
Boss™ clamps are for single use only, once removed they are to be discarded
-
The bolts used in the boss interlocking clamps are not standard bolts
-
They vary from standard bolts in their length, diameter, overall thread length and material hardness
-
These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
-
Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance
-
Worn-out hose couplings can be dangerous
-
They should be checked regularly and replace when necessary
-
Each coupling user should review applications and add safety devices where indicated
-
Note: pressurized steam is an extremely dangerous commodity
-
Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
-
Always follow the manufacturer's product recommendations for pressurized steam handling
-
Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Do not use in connection with drinking water
-
Wash hands after handling
Additional Information
-
-
Package Description
10/BX
Reviews
There are yet no reviews for this product.
Please log in to write a review.
Log in