FUEL ADDITIVES
1-QT DIESEL FUEL CONDITIONER-PSD1025P >
16-OZ DIESEL FUEL SUPPLEMENT-PSD10166 >
1-GAL LUCAS DIESEL FUEL TREATMENT-PRI10013L>
1-GAL MARVEL MYSTERY OIL-MAV014 >
1-PT MARVEL MYSTERY OIL-MAV012 >
NO SMOKE TWO STROKE OIL 1 GAL MIX-SPL00425 >
Recently Viewed
NOTCHED GRIP V-BELTS-BRWBX66>
30-T #40-1 CHAIN SPROCKETS-BRWH4030X11/4>
Gardner Bender 20-102 Crimp Ring Terminal, 22 to 16 AWG Conductor, 0.82 in L, Red
Dichtomatik N70437 O-Ring, 437 Dash Number, 5.975 in ID x 6.525 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
THE MAGNETIC SOURCE™ 07580 Rotating Magnetic Hook, 1-1/2 x 1/2 in, 65 lb Capacity, Neodymium
Industrial strength magnetic hook rotates a full 360 deg and swings 180 deg. Heavy duty construction ideal for holding and storing cables, tools and wires in the garage or workshop. Black base includes protective, non-scratch liner.
Milwaukee® 49-57-1687 Annular Cutter, 1-11/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-11/16 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-11/16 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
