THREADLOCKERS
1-LITER #243 OIL TOLERANT THREADLOCKER - LOC1330333>
10-ML LOW STRENGTH THREADLOCKER-PEM22210 >
SURFACE INSENSITIVE BLUE THREADLOCK-PEM24350 >
10-ML PERMANENT STRENGTH RED THREADLOCK-PEM26210 >
250-ML #266 HIGH TEMP THREADLOCKER-LOC26774 >
2-OZ TUBE BOLT & NUT THREAD LOCKER-JWH350117 >
TUBE WOOD-FILLER THREAD LOCKER-JWH350125 >
2.5-ML MEDIUM STRENGTH THREAD LOCKER-JWH572268 >
HIGH-STRENGTH THREADLOCKER FOR HEAVY-DUTY APPLICATIONS. ESPECIALLY WELL-SUITED FOR PERMANENTLY LOCKING STUDS AND PRESS FITS. ADD 3000 PSI HOLDING POWER ON SLIP AND PRESS FIT ASSEMBLIES. REPLACES SET SCREWS AND SNAP RINGS. LOCKS AGAINST VIBRATION LOOSENING. REQUIRES EXTRA EFFORT OR SPECIAL TOOLS FOR REMOVAL.-JWH591033 >
Loctite 266 orange threadlocker is compatible with metal materials with a 24 hr cure time. Delivers great performance with tensile strength of 270 psi. Minimum to maximum operating temperatures are -65 F to +450 F. Comes in a 50 ml Bottle.
Recently Viewed
GPĀ® 1907M Standard and Deep Length Socket Driver Bit, 3/8 in Hex Drive, 7 mm, 16 mm L Bit
GPĀ® 1907M Standard and Deep Length Socket Driver Bit, 3/8 in Hex Drive, 7 mm, 16 mm L Bit
ProtoĀ® J3120 Open End Wrench, 5/8 in Wrench, Angled/Double Head, 6 in L, Nickel, Full Polished, ASME B107.100
5-MM SHORT ARM HEX KEY-MET91105SA >
1/4-AMP 250-VOLT-AC FA GLASS FUSES LIT V-235-1/4
1/4-AMP 250-VOLT FUSES
GreenleeĀ® Slug-Splitter SCĀ® 28159 Round Replacement Conduit Die, Round Punch, 1 in Conduit/Pipe, 1 in ID Knockout, Stainless Steel, 10 ga
GreenleeĀ® Slug-Splitter SCĀ® 28159 Round Replacement Conduit Die, Round Punch, 1 in Conduit/Pipe, 1 in ID Knockout, Stainless Steel, 10 ga
1/4" X 2-1/2" SQUARE TOOL BITS, M-34" H.S.S.-ARS86043 >
