Timing Belts
Browning® 3549003 Type B Synchronous Belt, 60 Teeth, 8 mm Pitch, 480 mm OAL, 20 mm W, Neoprene
Browning® 3549003 Type B Synchronous Belt, 60 Teeth, 8 mm Pitch, 480 mm OAL, 20 mm W, Neoprene
Browning L-PITCH X 30" DBL/TIMING BELTS BRW D-300-L-050
Browning® 3111861 Double Sided Type L Synchronous Belt, 80 Teeth, 3/8 in Pitch, 30 in OAL, 1/2 in W, Neoprene
Browning H-PITCH X 33" DBL/TIMING BELTS BRW D-330-H-100
Browning® 3111903 Double Sided Type H Synchronous Belt, 66 Teeth, 1/2 in Pitch, 33 in OAL, 1 in W, Neoprene
Bando Synchro-Link® 394L100G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Bando Synchro-Link® 394L075G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 3/4 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Bando Synchro-Link® 394L050G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1/2 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Recently Viewed
BEARINGS-CYLINDRICAL ROLLER BEARINGS-CHIMUS1308TM1>
A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag and gives twice the coverage of conventional aerosol enamels. A rust proof industrial primer formulated specifically for use with MRO® industrial protective coatings. This high solids paint gives twice the coverage of conventional aerosol primers. Heat resistant, VOC compliant and fast drying.
MORSE® 59328 5961 Center Cutting Regular Length Single End End Mill, 16 mm Dia Cutter, 32 mm Length of Cut, 4 Flutes, 16 mm Dia Shank, 89 mm OAL, Bright
MORSE® 90788 5943T Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, TiAlN Coated
508187 DO-IT-BEST/SOUTHWIRE SINGLE RECEPTACLE 4" X 2-1/8" HANDY BOX COVER
DURABLE PRE-GALVANIZED STEEL CONSTRUCTION. ROUNDED CORNERS TO MATCH HANDY BOX. UL LISTED
-JWH508187 >
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
