Pillow Block Housings
Dodge® 042106 515 Both Ends Open Split Type SAF-XT Pillow Block Housing, Two-Bolt Base Mount, 3-1/4 in Base to Bore Centerline, 11-1/4 in OAL 6.44 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 2-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Dodge® 042129 520 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 4-1/2 in Base to Bore Centerline, 15-1/4 in OAL x 8-3/4 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Dodge® 042137 526 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 6 in Base to Bore Centerline, 18.38 in OAL x 11.69 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA97K>
POLY TARPS-JET229531>
KEVLAR V-BELTS-PIXA71K>
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE-PIXAX91 >
Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings
14.4-V 4-GALLON BACKPACK SPRAYER-VALBPSREV401>
