CARTRIDGE ROLLS
21346-ZA ARC ABRASIVE
1/2" X 1-1/2" X 1/8" 120-GRIT CARTRIDGE ROLL SANDPAPER-ARC21346ZA >
ARC 21284 3/8" X 1-1/2" X 1/8" 80 GRIT ALUMINUM OXIDE CARTRIDGE ROLL
THE ARC ABRASIVES CARTRIDGE ROLL IS SPECIFICALLY ENGINEERED FOR APLICATIONS SUCH AS: STOCK REMOVAL, BLENDING, FLASH REMOVAL, DEBURRING, AND POLISHING. PERFECT FOR USE ON VARIOUS METALS ND MATERIALS
-ARC21284 >
ARC 23110 3/8" X 1" X 1/8" 180 GRIT ALUMINUM OXIDE FULL TAPER CARTRIDGE ROLL
THE ARC ABRASIVES FULL TAPER IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, BLENDING, FLASH REMOVAL, DEBURRING, AND POLISHING. PERFECT FOR USE ON VARIOUS METALS AND MATERIALS
-ARC23110 >
Recently Viewed
Proto® J1212EFS Open End Stubby Length Combination Wrench, 3/8 in Wrench, 6 Points, 15 deg Offset, 4-19/64 in OAL, Alloy Steel, Satin
Proto® J1212EFS Open End Stubby Length Combination Wrench, 3/8 in Wrench, 6 Points, 15 deg Offset, 4-19/64 in OAL, Alloy Steel, Satin
IRWIN Offset Straight and Left Utility Snips have a powerful compound action, and durable hot-drop forged steel blades that can handle the toughest jobs with less cutting effort. Use this tool to cut sheet metal, plastic, rubber, vinyl or other materials. Featuring ProTouch grips that offer superior comfort and control, Irwin offset snips let you work longer with less hand fatigue. Their E-Z close latch keeps the blade safely closed when it's not in use, and they have an offset blade that keeps your hands away from sharp material edges while you work. left and straight Irwin snips have a 1-5/16-inch cut length and are 9-1/2 inches long. They can cut up to 18-gauge cold-roll steel or 23-gauge stainless steel.
GEARWRENCH® 9528N Open End Regular Length Reversible Combination Wrench, 1/2 in Wrench, 12 Points, 15 deg Offset, 6.902 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
Proto® J1208EFS Open End Stubby Length Combination Wrench, 1/4 in Wrench, 6 Points, 15 deg Offset, 3-9/64 in OAL, Alloy Steel, Satin
Proto® J1208EFS Open End Stubby Length Combination Wrench, 1/4 in Wrench, 6 Points, 15 deg Offset, 3-9/64 in OAL, Alloy Steel, Satin
GEARWRENCH® 85570 Open End Combination Wrench, 5/16 in Wrench, 12 Points, 0/15 deg Offset, 5.508 in OAL, Polished Chrome
The GEARWRENCH Open-End Ratcheting Wrenches make short work of tough jobs. These wrenches let you quickly ratchet nuts and bolts on or off without removing the wrench from the fastener. The open end has the dependable strength of a crows foot ratchet, while the ratcheting box-end works with just five degrees of swing arc to let you turn fasteners in low-access areas.
GEARWRENCH® 85024D XL Series Open End Combination Wrench, 24 mm Wrench, 12 Points, 0/15 deg Offset, 14 in OAL, Polished Chrome/Nickel Plated
The GEARWRENCH ratcheting combination wrenches are the original patented ratcheting wrench! The ratcheting box end is designed to need as little as 5° to move fasteners versus 30° for standard wrenches. The wrenches are made from strong alloy steel with a bright, full polish chrome finish. The ratcheting box end features off-corner loading for a better grip on the fastener and reduces fastener rounding. They’re available in various lengths and styles, including: XL length, stubby, flex, stubby flex, and locking flex.
